[    0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000001f640000 end: 000000001f740000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000001f740000 size: 0000000000010000 end: 000000001f750000 type: 3
[    0.000000] copy_e820_map() start: 000000001f750000 size: 00000000000b0000 end: 000000001f800000 type: 4
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000ff380000 size: 0000000000c80000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001f740000 (usable)
[    0.000000]  BIOS-e820: 000000001f740000 - 000000001f750000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001f750000 - 000000001f800000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 503MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 128832) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   128832
[    0.000000]   HighMem    128832 ->   128832
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   128832
[    0.000000] On node 0 totalpages: 128832
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 974 pages used for memmap
[    0.000000]   Normal zone: 123762 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000fa5a0
[    0.000000] ACPI: RSDT (v001 A M I  OEMRSDT  0x05000616 MSFT 0x00000097) @ 0x1f740000
[    0.000000] ACPI: FADT (v002 A M I  OEMFACP  0x05000616 MSFT 0x00000097) @ 0x1f740200
[    0.000000] ACPI: MADT (v001 A M I  OEMAPIC  0x05000616 MSFT 0x00000097) @ 0x1f740300
[    0.000000] ACPI: OEMB (v001 A M I  OEMBIOS  0x05000616 MSFT 0x00000097) @ 0x1f750040
[    0.000000] ACPI: DSDT (v001  75i6G 75i6G211 0x00000211 INTL 0x02002026) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:4 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 1f800000:df600000)
[    0.000000] Detected 2663.323 MHz processor.
[   10.275467] Built 1 zonelists.  Total pages: 127826
[   10.275471] Kernel command line: root=UUID=e9607838-571a-429d-a075-0246bc112ba7 ro quiet splash
[   10.275646] mapped APIC to ffffd000 (fee00000)
[   10.275649] mapped IOAPIC to ffffc000 (fec00000)
[   10.275652] Enabling fast FPU save and restore... done.
[   10.275656] Enabling unmasked SIMD FPU exception support... done.
[   10.275666] Initializing CPU#0
[   10.275741] PID hash table entries: 2048 (order: 11, 8192 bytes)
[   10.277283] Console: colour VGA+ 80x25
[   10.277577] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   10.277873] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   10.286532] Memory: 499648k/515328k available (1992k kernel code, 15108k reserved, 893k data, 328k init, 0k highmem)
[   10.286544] virtual kernel memory layout:
[   10.286545]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   10.286546]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   10.286547]     vmalloc : 0xe0000000 - 0xff7fe000   ( 503 MB)
[   10.286549]     lowmem  : 0xc0000000 - 0xdf740000   ( 503 MB)
[   10.286550]       .init : 0xc03d7000 - 0xc0429000   ( 328 kB)
[   10.286551]       .data : 0xc02f2264 - 0xc03d16d4   ( 893 kB)
[   10.286552]       .text : 0xc0100000 - 0xc02f2264   (1992 kB)
[   10.286556] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   10.363637] Calibrating delay using timer specific routine.. 5330.82 BogoMIPS (lpj=10661651)
[   10.363685] Security Framework v1.0.0 initialized
[   10.363691] SELinux:  Disabled at boot.
[   10.363710] Mount-cache hash table entries: 512
[   10.363867] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000651d 00000000 00000001
[   10.363877] monitor/mwait feature present.
[   10.363880] using mwait in idle threads.
[   10.363888] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   10.363891] CPU: L2 cache: 256K
[   10.363894] CPU: Hyper-Threading is disabled
[   10.363896] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003180 0000651d 00000000 00000001
[   10.363909] Compat vDSO mapped to ffffe000.
[   10.363913] Remapping vsyscall page to ffffe000
[   10.363932] Checking 'hlt' instruction... OK.
[   10.379731] SMP alternatives: switching to UP code
[   10.380050] Freeing SMP alternatives: 11k freed
[   10.380331] Early unpacking initramfs... done
[   10.697561] ACPI: Core revision 20060707
[   10.697750] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   10.700000] CPU0: Intel(R) Celeron(R) CPU 2.66GHz stepping 09
[   10.700047] Total of 1 processors activated (5330.82 BogoMIPS).
[   10.700182] ENABLING IO-APIC IRQs
[   10.700369] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   10.847092] Brought up 1 CPUs
[   10.847388] Booting paravirtualized kernel on bare hardware
[   10.847502] Time: 19:20:38  Date: 04/02/107
[   10.847538] NET: Registered protocol family 16
[   10.847684] EISA bus registered
[   10.847692] ACPI: bus type pci registered
[   10.847788] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[   10.847790] PCI: Using configuration type 1
[   10.847792] Setting up standard PCI resources
[   10.861255] ACPI: Interpreter enabled
[   10.861261] ACPI: Using IOAPIC for interrupt routing
[   10.861983] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   10.861992] PCI: Probing PCI hardware (bus 00)
[   10.862390] Boot video device is 0000:00:02.0
[   10.862783] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[   10.862788] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[   10.863212] PCI: Transparent bridge - 0000:00:1e.0
[   10.864069] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   10.866896] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[   10.874523] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   10.874832] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   10.875213] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   10.875523] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[   10.875832] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   10.876136] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   10.876442] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   10.876755] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   10.876938] Linux Plug and Play Support v0.97 (c) Adam Belay
[   10.876956] pnp: PnP ACPI init
[   10.883101] pnp: PnP ACPI: found 14 devices
[   10.883110] PnPBIOS: Disabled by ACPI PNP
[   10.883201] PCI: Using ACPI for IRQ routing
[   10.883205] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   10.891246] NET: Registered protocol family 8
[   10.891249] NET: Registered protocol family 20
[   10.892166] pnp: 00:0c: ioport range 0x290-0x29f has been reserved
[   10.892653] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[   10.892669] PCI: Bridge: 0000:01:00.0
[   10.892671]   IO window: disabled.
[   10.892676]   MEM window: disabled.
[   10.892681]   PREFETCH window: ee600000-ee6fffff
[   10.892687] PCI: Bridge: 0000:00:1e.0
[   10.892690]   IO window: b000-bfff
[   10.892696]   MEM window: ff000000-ff0fffff
[   10.892701]   PREFETCH window: ee600000-ee6fffff
[   10.892717] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   10.892767] NET: Registered protocol family 2
[   10.927028] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   10.927141] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   10.927233] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[   10.927279] TCP: Hash tables configured (established 16384 bind 8192)
[   10.927283] TCP reno registered
[   10.939119] checking if image is initramfs... it is
[   11.559123] Freeing initrd memory: 6987k freed
[   11.559875] audit: initializing netlink socket (disabled)
[   11.559895] audit(1178133638.364:1): initialized
[   11.560063] VFS: Disk quotas dquot_6.5.1
[   11.560089] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   11.560154] io scheduler noop registered
[   11.560158] io scheduler anticipatory registered
[   11.560161] io scheduler deadline registered
[   11.560172] io scheduler cfq registered (default)
[   11.560651] isapnp: Scanning for PnP cards...
[   11.912256] isapnp: No Plug & Play device found
[   12.005561] Real Time Clock Driver v1.12ac
[   12.005689] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   12.005842] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   12.007657] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   12.008155] mice: PS/2 mouse device common for all mice
[   12.008970] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   12.009344] input: Macintosh mouse button emulation as /class/input/input0
[   12.009397] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   12.009403] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   12.009787] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   12.012507] serio: i8042 KBD port at 0x60,0x64 irq 1
[   12.012518] serio: i8042 AUX port at 0x60,0x64 irq 12
[   12.012766] EISA: Probing bus 0 at eisa.0
[   12.012807] EISA: Detected 0 cards.
[   12.042878] TCP cubic registered
[   12.042888] NET: Registered protocol family 1
[   12.042919] Using IPI No-Shortcut mode
[   12.043034] ACPI: (supports S0 S1 S3 S4 S5)
[   12.043089]   Magic number: 7:429:343
[   12.043236]   hash matches device tty60
[   12.043615] Freeing unused kernel memory: 328k freed
[   12.045535] Time: tsc clocksource has been installed.
[   12.056619] input: AT Translated Set 2 keyboard as /class/input/input1
[   13.309078] Capability LSM initialized
[   13.363351] ACPI: Processor [CPU1] (supports 8 throttling states)
[   13.363370] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[   13.363379] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[   13.363387] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[   14.044578] usbcore: registered new interface driver usbfs
[   14.044610] usbcore: registered new interface driver hub
[   14.044646] usbcore: registered new device driver usb
[   14.045798] USB Universal Host Controller Interface driver v3.0
[   14.045871] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[   14.045885] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   14.045890] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   14.046056] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   14.046090] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000dc00
[   14.046241] usb usb1: configuration #1 chosen from 1 choice
[   14.046281] hub 1-0:1.0: USB hub found
[   14.046292] hub 1-0:1.0: 2 ports detected
[   14.113128] 8139too Fast Ethernet driver 0.9.28
[   14.151079] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
[   14.151095] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   14.151100] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   14.151132] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   14.151162] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e000
[   14.151282] usb usb2: configuration #1 chosen from 1 choice
[   14.151314] hub 2-0:1.0: USB hub found
[   14.151325] hub 2-0:1.0: 2 ports detected
[   14.258931] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   14.258948] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   14.258953] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   14.258988] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   14.259019] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
[   14.259140] usb usb3: configuration #1 chosen from 1 choice
[   14.259176] hub 3-0:1.0: USB hub found
[   14.259186] hub 3-0:1.0: 2 ports detected
[   14.340740] Floppy drive(s): fd0 is 1.44M
[   14.366801] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
[   14.366818] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   14.366822] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   14.366858] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   14.366885] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e800
[   14.367006] usb usb4: configuration #1 chosen from 1 choice
[   14.367038] hub 4-0:1.0: USB hub found
[   14.367050] hub 4-0:1.0: 2 ports detected
[   14.377785] FDC 0 is a post-1991 82077
[   14.475343] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[   14.475366] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   14.475371] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   14.475431] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   14.475476] ehci_hcd 0000:00:1d.7: debug port 1
[   14.475484] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[   14.475499] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xff27fc00
[   14.479378] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   14.479490] usb usb5: configuration #1 chosen from 1 choice
[   14.479533] hub 5-0:1.0: USB hub found
[   14.479545] hub 5-0:1.0: 8 ports detected
[   14.586887] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 22 (level, low) -> IRQ 20
[   14.587238] eth0: RealTek RTL8139 at 0xe0026c00, 00:13:8f:ad:e9:2c, IRQ 20
[   14.587242] eth0:  Identified 8139 chip type 'RTL-8101'
[   14.589263] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   14.596905] SCSI subsystem initialized
[   14.603499] libata version 2.20 loaded.
[   14.608256] ata_piix 0000:00:1f.1: version 2.10ac1
[   14.608280] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   14.608305] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   14.608595] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
[   14.608649] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
[   14.608677] scsi0 : ata_piix
[   14.770125] scsi1 : ata_piix
[   15.101948] ata2.00: ATAPI, max UDMA/33
[   15.273730] ata2.00: configured for UDMA/33
[   15.275409] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H20N 1.01 PQ: 0 ANSI: 5
[   15.275958] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[   15.275981] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
[   15.276007] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   15.276070] ata3: SATA max UDMA/133 cmd 0x0001d000 ctl 0x0001cc02 bmdma 0x0001c000 irq 18
[   15.276108] ata4: SATA max UDMA/133 cmd 0x0001c800 ctl 0x0001c402 bmdma 0x0001c008 irq 18
[   15.276122] scsi2 : ata_piix
[   15.445541] ata3.00: ata_hpa_resize 1: sectors = 586072368, hpa_sectors = 586072368
[   15.445551] ata3.00: ATA-7: SAMSUNG HD300LJ, ZT100-13, max UDMA7
[   15.445554] ata3.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   15.457548] ata3.00: ata_hpa_resize 1: sectors = 586072368, hpa_sectors = 586072368
[   15.457557] ata3.00: configured for UDMA/133
[   15.457573] scsi3 : ata_piix
[   15.627149] ATA: abnormal status 0x7F on port 0x0001c807
[   15.627335] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD300LJ  ZT10 PQ: 0 ANSI: 5
[   15.652900] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   15.652908] Uniform CD-ROM driver Revision: 3.20
[   15.653043] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   15.657863] sr 1:0:0:0: Attached scsi generic sg0 type 5
[   15.657890] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[   15.664994] SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
[   15.665149] sda: Write Protect is off
[   15.665152] sda: Mode Sense: 00 3a 00 00
[   15.667517] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   15.667746] SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
[   15.667762] sda: Write Protect is off
[   15.667765] sda: Mode Sense: 00 3a 00 00
[   15.667786] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   15.667790]  sda: sda1 sda2
[   15.694294] sd 2:0:0:0: Attached scsi disk sda
[   15.921356] Attempting manual resume
[   15.921361] swsusp: Resume From Partition 8:2
[   15.921363] PM: Checking swsusp image.
[   15.921617] PM: Resume from disk failed.
[   15.969201] kjournald starting.  Commit interval 5 seconds
[   15.969219] EXT3-fs: mounted filesystem with ordered data mode.
[   22.432792] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   24.035206] iTCO_vendor_support: vendor-support=0
[   24.041292] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   24.049595] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   24.214718] Linux agpgart interface v0.102 (c) Dave Jones
[   24.216852] agpgart: Detected an Intel 865 Chipset.
[   24.217019] agpgart: Detected 8060K stolen memory.
[   24.232390] agpgart: AGP aperture is 128M @ 0xf0000000
[   24.249394] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   24.249529] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[   24.249585] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   24.622421] intel_rng: FWH not detected
[   24.666948] input: PC Speaker as /class/input/input2
[   24.835400] logips2pp: Detected unknown logitech mouse model 0
[   25.062829] parport: PnPBIOS parport detected.
[   25.062886] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   25.085291] Linux video capture interface: v2.00
[   25.141420] bttv: driver version 0.9.16 loaded
[   25.141426] bttv: using 16 buffers with 2080k (520 pages) each for capture
[   25.141519] bttv: Bt8xx card found (0).
[   25.141557] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 21 (level, low) -> IRQ 21
[   25.141574] bttv0: Bt878 (rev 17) at 0000:02:0c.0, irq: 21, latency: 32, mmio: 0xee6fe000
[   25.141592] bttv0: using: Kodicom 4400R (slave) [card=133,insmod option]
[   25.141629] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[   25.142501] bttv0: using tuner=-1
[   25.142506] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[   25.143321] bttv0: registered device video0
[   25.143380] bttv0: registered device vbi0
[   25.143409] bttv0: PLL: 28636363 => 35468950 .. ok
[   25.180888] bttv: Bt8xx card found (1).
[   25.180922] ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 22 (level, low) -> IRQ 20
[   25.180938] bttv1: Bt878 (rev 17) at 0000:02:0d.0, irq: 20, latency: 32, mmio: 0xee6fc000
[   25.180953] bttv1: using: Kodicom 4400R (master) [card=132,insmod option]
[   25.180987] bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init]
[   25.323377] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[   26.706696] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 22
[   26.706739] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   27.022479] intel8x0_measure_ac97_clock: measured 59039 usecs
[   27.022484] intel8x0: clocking to 48000
[   31.573132] bttv1: using tuner=-1
[   31.573139] bttv1: i2c: checking for TDA9887 @ 0x86... not found
[   37.965473] bttv1: registered device video1
[   37.965771] bttv1: registered device vbi1
[   37.965802] bttv1: PLL: 28636363 => 35468950 .. ok
[   38.002588] bttv: Bt8xx card found (2).
[   38.002624] ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 23 (level, low) -> IRQ 19
[   38.002641] bttv2: Bt878 (rev 17) at 0000:02:0e.0, irq: 19, latency: 32, mmio: 0xee6fa000
[   38.002660] bttv2: using: Kodicom 4400R (slave) [card=133,insmod option]
[   38.002700] bttv2: gpio: en=00000000, out=00000000 in=00ffffff [init]
[   44.393073] bttv2: using tuner=-1
[   44.393081] bttv2: i2c: checking for TDA9887 @ 0x86... not found
[   50.785411] bttv2: registered device video2
[   50.785653] bttv2: registered device vbi2
[   50.785693] bttv2: PLL: 28636363 => 35468950 .. ok
[   50.820274] bttv: Bt8xx card found (3).
[   50.820312] ACPI: PCI Interrupt 0000:02:0f.0[A] -> GSI 20 (level, low) -> IRQ 23
[   50.820328] bttv3: Bt878 (rev 17) at 0000:02:0f.0, irq: 23, latency: 32, mmio: 0xee6f8000
[   50.820353] bttv3: using: Kodicom 4400R (slave) [card=133,insmod option]
[   50.820392] bttv3: gpio: en=00000000, out=00000000 in=00ffffff [init]
[   57.209037] bttv3: using tuner=-1
[   57.209045] bttv3: i2c: checking for TDA9887 @ 0x86... not found
[   63.601385] bttv3: registered device video3
[   63.601650] bttv3: registered device vbi3
[   63.601689] bttv3: PLL: 28636363 => 35468950 .. ok
[   63.641117] bt878: AUDIO driver version 0.0.0 loaded
[   63.642541] bt878: Bt878 AUDIO function found (0).
[   63.642573] ACPI: PCI Interrupt 0000:02:0c.1[A] -> GSI 21 (level, low) -> IRQ 21
[   63.642583] bt878_probe: card id=[0x0],[ <NULL> ] has DVB functions.
[   63.642593] bt878(0): Bt878 (rev 17) at 02:0c.1, irq: 21, latency: 32, memory: 0xee6ff000
[   63.642851] bt878: Bt878 AUDIO function found (1).
[   63.642874] ACPI: PCI Interrupt 0000:02:0d.1[A] -> GSI 22 (level, low) -> IRQ 20
[   63.642882] bt878_probe: card id=[0x0],[ <NULL> ] has DVB functions.
[   63.642890] bt878(1): Bt878 (rev 17) at 02:0d.1, irq: 20, latency: 32, memory: 0xee6fd000
[   63.643158] bt878: Bt878 AUDIO function found (2).
[   63.643180] ACPI: PCI Interrupt 0000:02:0e.1[A] -> GSI 23 (level, low) -> IRQ 19
[   63.643188] bt878_probe: card id=[0x0],[ <NULL> ] has DVB functions.
[   63.643202] bt878(2): Bt878 (rev 17) at 02:0e.1, irq: 19, latency: 32, memory: 0xee6fb000
[   63.643456] bt878: Bt878 AUDIO function found (3).
[   63.643477] ACPI: PCI Interrupt 0000:02:0f.1[A] -> GSI 20 (level, low) -> IRQ 23
[   63.643484] bt878_probe: card id=[0x0],[ <NULL> ] has DVB functions.
[   63.643492] bt878(3): Bt878 (rev 17) at 02:0f.1, irq: 23, latency: 32, memory: 0xee6f9000
[   63.908573] fuse init (API version 7.8)
[   63.929742] lp0: using parport0 (interrupt-driven).
[   63.969652] Adding 996020k swap on /dev/disk/by-uuid/3b441916-cd28-434a-bcbd-a6d372e706fe.  Priority:-1 extents:1 across:996020k
[   64.064960] EXT3 FS on sda1, internal journal
[   65.568663] NET: Registered protocol family 17
[   69.605333] Using specific hotkey driver
[   69.652117] ibm_acpi: ec object not found
[   69.737445] input: Power Button (FF) as /class/input/input4
[   69.742341] ACPI: Power Button (FF) [PWRF]
[   69.778285] input: Power Button (CM) as /class/input/input5
[   69.783201] ACPI: Power Button (CM) [PWRB]
[   69.837532] No dock devices found.
[   69.912599] pcc_acpi: loading...
[   73.910662] [drm] Initialized drm 1.1.0 20060810
[   73.917335] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[   73.920596] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   74.801186] ppdev: user-space parallel port driver
[   77.214844] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[   77.214850] apm: overridden by ACPI.
